| |
|
| |
 |
| |
|
| |
|
| |
|
| |
|
| |
| 7. Marine Bunk / Berth Light Fitting |
 |
| Cat. No. |
Specification |
|
|
| 5151 |
Brass / SS body
decorative type light fitting with On/Off piano
switch. Adjustable top lid to control flow of light.
Powder coated finish. Brass lamp holder suitable for
25W lamp. |
|
|
|
| |
|
| |
| 8. Flameproof Well Glass Fitting |
Photo will be updated
soon...
|
| Cat. No. |
Specification |
| |
|
| F0011 |
LM6 Aluminium body
flameproof well glass fitting with heat resistance
toughened clear glass with MS protective wire guard.
Suitable cable entries as per requirement max. 4
nos. porcelain ES lamp holder with connector.
Fitting suitable up to 200W. lamp. |
|
|
|
| |
|
| |
| 9. Marine Watertight Flood Light Fitting |
|
| Cat. No. |
Specification |
| |
|
| 2691 |
Cast Aluminium body light fitting
with clear toughened front glass with Aluminium ring
with rubber gasket fitting with Aluminum polished
reflector and MS bracket for movement and fixing the
fitting. Porcelain ES (screw type) lamp holder.
Suitable up to 200W. lamp. |
| 2692 |
--do-- Suitable up to 300W. lamp |
| 2693 |
--do-- suitable up to
500W. lamp |
| 2861 |
Cast Aluminium body
with toughened rectangle protective glass and
Aluminium polished reflector and MS bracket for
movement & fixing fitting. Hinged type frame and
glass with rubber gasket. Porcelain connector.
Suitable for 1000W. Halogen tube. |
| 2862 |
--do-- suitable for 500W. halogen
tube. |
|
|
|
| |
|
| |
| 10. Marine Security Search Light Fitting |
|
| Cat. No. |
Specification |
| |
|
| 2571 |
Security Search Light fitting
suitable up to 1000W. Halogen / Projector lamp.
Brass body with hot air escape provision and MS
Stand assembly. Powder coated finishing, mirror
glass reflector with front Aluminium ring and
toughened glass. Fitting with exhaust fan. |
| 2572 |
--do-- suitable up to 300W Halogen
lamp. |
| 2573 |
-do-- suitable up to
2000W halogen lamp. |
| Note |
Above fittings are also
available for HPSV / HPMH lamp as per request.
Portable and movable trolley are also available with
fitting on request. |
|
|
|
| |
TOP |
| |
| 11. Marine Bulkhead Fitting |
|
| Cat. No. |
Specification |
|
|
| 1101 |
Cast
Aluminium body bulkhead fitting with clear glass and
protective MS wire guard. Porcelain BC lamp holder
with 2 way connector. Suitable up to 60W. lamp. |
| 1141 |
Oblong bulkhead fitting,
cast Aluminium body with Aluminium hinged cover and
locking arrangement oblong glass cover with
protective SS wire guard, porcelain BC / ES lamp
holder with 2 way connector. 2 nos. of conduit
entries at top and bottom |
| 1142 |
Same as per 1141 - not
hinged type. Aluminium cover fix up with 4 nos. of
screws. 2 nos. Cable entries opposite side with
brass cable glands. Suitable up to 100W lamp. |
| 1342 |
--do-- cast
Brass body. |
| 1102 |
Cast Aluminium body
round shape bulkhead fitting with Aluminium hinged
cover and locking arrangement. Clear glass and MS
protective wire guard. BC porcelain lamp holder with
2 way connector. 2 nos. cable entries. Suitable for
60W lamp. |
| 1103 |
Same as per 1102
- suitable for 200W. lamp. |
| 1144 |
Cast Aluminium body
emergency use bulkhead light fitting with clear
glass and Aluminium body frame. Brass SBC lamp
holder for 25W. 24V. lamp. 2 nos. Cable entries with
plastic cable glands. |
| 1344 |
--do-- cast Brass body. |
| 1146 |
Cast Aluminium body with Aluminium
frame with opal acrylic shade. Decorative type.
fitting with Brass SBC lamp holder for up to 25W
lamp. Mainly in emergency use. 2 nos. Cable entries
with 2 nos. Brass cable glands. |
| |
|
|
|
|
| |
|
| |
| 12. Flameproof Bulkhead Fitting |
Photo will be updated
soon... |
| Cat. No. |
Specification |
| |
|
| F0012 |
LM 6
Aluminium body flameproof and weatherproof bulkhead
light fitting with heat resistance toughened glass
cover with ES porcelain lamp holder suitable for
200W lamps. |
|
|
|
| |
|
| |
| 13. Marine Fluorescent Light Fittings |
|
| Cat. No. |
Specification |
| |
|
| 9220/F |
Vibration
resistance and drip proof engine room light fitting
suitable for 2 x 20W. 230V. 50hz fluorescent tubes
arranged side by side. The fitting made from Fibre
body & provided with clear one piece acrylic cover
is firmly secured to the housing with stainless
steel toggles and fitted with rubber gasket to make
totally insect free. The fitting provided with 2
nos. 20W copper polyester filled ballasts, power
factor improvement capacitor, starter, lamp holder,
2 nos. cable entries, Brass glands etc. Duly wired
up to a suitable connector with provision for
earthing. 2 nos. MS brackets provided with lining
for vibration mounting. |
| 9220/MS |
--do-- MS
powder coated body |
| 9240/F |
Same as per 9220/F -
suitable for 2 nos. of 40W tubes. |
| 9240/MS |
--do-- MS
powder coated body. |
| 8220 |
Rectangular modular
decorative fitting, recessed mounting type suitable
for 230V. 50hz 2 x 20W. fluorescent tubes arranged
side by side. The fitting consists of a housing made
from heavy gauge CRCA MS sheet in duly powder
coated, the fitting is provided with molded
opal/clear acrylic diffuser with frame. The fitting
with 2 nos. 20W. copper polyester filled heavy duty
ballasts, power factor improvement capacitor,
starter, spring loaded bi-pin rotary holders. 2 nos
cable entries with rubber grommets etc., duly wired
up to a suitable connector with provision for
earthing. |
| 8240 |
--do--
suitable for 2 nos. of 40W. Tubes. |
| 7120 |
Cornic well decorative
fitting suitable for 1 x 20W. 230V. 50 hz
fluorescent tube, made from CRCA MS sheet, duly
powder coated with opal/clear acrylic diffuser.
Fitting provided with 2 nos cable entries, duly
wired with 20W. polyester filled copper heavy duty
choke, spring loaded bi-pin rotary holder, starter
suitable condenser for PF. improvement. |
| 7220 |
--do-- suitable for 2 nos. of 20W.
tubes. |
| 6120 |
Mirror light fitting suitable for 1
x 20W. tubes. MS body finished with powder coated
duly wire with 1 number heavy duty copper choke,
bi-pin rotary holder, starter with seat, condenser
for power factor improvement, suitable for 230V.
1PH. AC with built in piano type switch & 2 pin
socket. |
| 6110 |
--do-- suitable for 10W/9W tube. |
| Note: |
All the above fittings also
available with 110V. and 60Hz. as per requirement. |
|
|
|
| |
|
| |
|
| |
|
